Habe CPUID Problem

[Prog40]

Wollte mal CPUID Funktion ausprobieren, nach der suche habe ich eine Adresse gefunden http://www.openbg.net/sto/os/xml/cpuid.html wo alles beschrieben ist.

... wenn ich aber die Datei ausführen will bekomme ich WIN Error:
*
Die Anweisung in "=x00401890" verweist auf Speicher in "oxccccccc"
usw. blablablalalala
*

Kompiler bzw. Linker gibt keinen Fehler/Warnung aus (als IDE benutze ich VC++)

vielleicht kann jemand helfen?

Prog40

Hier das beispiel:

#include <stdio.h> 
#include <string.h> 

void main() { 
  char VendorSign[13];   //We need somewhere to store our vendorstring 
  unsigned long MaxEAX;  //This will be used to store the maximum EAX 
                         //possible to call CPUID with. 

  unsigned long REGEAX, REGEBX, REGECX, REGEDX; 
  int dFamily, dModel, dStepping, dFamilyEx, dModelEx; 
  char dType[10]; 
  int dComp1Supported[32]; 
  int dBrand, dCacheLineSize, dLogicalProcessorCount, dLocalAPICID; 

  unsigned long C; 
  unsigned long Q; 

  char* Comp1[32];  //This is the array that will hold the short names 
                    //for our features bitmap. The names added below is 
                    //valid for the Intel processors and many of them 
                    //are valid for other processors as well. 

  if(strcmp(VendorSign, "GenuineIntel")==0) { 
    Comp1[0]="FPU";   //Floating Point Unit 
    Comp1[1]="VME";   //Virtual Mode Extension 
    Comp1[2]="DE";    //Debugging Extension 
    Comp1[3]="PSE";   //Page Size Extension 
    Comp1[4]="TSC";   //Time Stamp Counter 
    Comp1[5]="MSR";   //Model Specific Registers 
    Comp1[6]="PAE";   //Physical Address Extesnion 
    Comp1[7]="MCE";   //Machine Check Extension 
    Comp1[8]="CX8";   //CMPXCHG8 Instruction 
    Comp1[9]="APIC";  //On-chip APIC Hardware 
    Comp1[10]="";     //Reserved 
    Comp1[11]="SEP";  //SYSENTER SYSEXIT 
    Comp1[12]="MTRR"; //Machine Type Range Registers 
    Comp1[13]="PGE";  //Global Paging Extension 
    Comp1[14]="MCA";  //Machine Check Architecture 
    Comp1[15]="CMOV"; //Conditional Move Instrction 
    Comp1[16]="PAT";  //Page Attribute Table 
    Comp1[17]="PSE-36"; //36-bit Page Size Extension 
    Comp1[18]="PSN";  //96-bit Processor Serial Number 
    Comp1[19]="CLFSH"; //CLFLUSH Instruction 
    Comp1[20]="";     //Reserved 
    Comp1[21]="DS";   //Debug Trace Store 
    Comp1[22]="ACPI"; //ACPI Support 
    Comp1[23]="MMX";  //MMX Technology 
    Comp1[24]="FXSR"; //FXSAVE FXRSTOR (Fast save and restore) 
    Comp1[25]="SSE";  //Streaming SIMD Extensions 
    Comp1[26]="SSE2"; //Streaming SIMD Extensions 2 
    Comp1[27]="SS";   //Self-Snoop 
    Comp1[28]="HTT";  //Hyper-Threading Technology 
    Comp1[29]="TM";   //Thermal Monitor Supported 
    Comp1[30]="IA-64"; //IA-64 capable 
    Comp1[31]="";     //Reserved 
  } 
  else if(strcmp(VendorSign, "AuthenticAMD")==0) { 
    Comp1[0]="FPU";   //Floating Point Unit 
    Comp1[1]="VME";   //Virtual Mode Extension 
    Comp1[2]="DE";    //Debugging Extension 
    Comp1[3]="PSE";   //Page Size Extension 
    Comp1[4]="TSC";   //Time Stamp Counter 
    Comp1[5]="MSR";   //Model Specific Registers 
    Comp1[6]="PAE";   //Physical Address Extesnion 
    Comp1[7]="MCE";   //Machine Check Extension 
    Comp1[8]="CX8";   //CMPXCHG8 Instruction 
    Comp1[9]="APIC";  //On-chip APIC Hardware 
    Comp1[10]="";     //Reserved 
    Comp1[11]="SEP";  //SYSENTER SYSEXIT 
    Comp1[12]="MTRR"; //Machine Type Range Registers 
    Comp1[13]="PGE";  //Global Paging Extension 
    Comp1[14]="MCA";  //Machine Check Architecture 
    Comp1[15]="CMOV"; //Conditional Move Instrction 
    Comp1[16]="PAT";  //Page Attribute Table 
    Comp1[17]="PSE-36"; //36-bit Page Size Extension 
    Comp1[18]="";     //? 
    Comp1[19]="MPC";  //MultiProcessing Capable (I made this short up, correct?) 
    Comp1[20]="";     //Reserved 
    Comp1[21]="";     //? 
    Comp1[22]="MIE";  //AMD Multimedia Instruction Extensions (I made this short up, correct?) 
    Comp1[23]="MMX";  //MMX Technology 
    Comp1[24]="FXSR"; //FXSAVE FXRSTOR (Fast save and restore) 
    Comp1[25]="SSE";  //Streaming SIMD Extensions 
    Comp1[26]="";     //? 
    Comp1[27]="";     //? 
    Comp1[28]="";     //? 
    Comp1[29]="";     //? 
    Comp1[30]="3DNowExt"; //3DNow Instruction Extensions (I made this short up, correct?) 
    Comp1[31]="3DNow"; //3DNow Instructions (I made this short up, correct?) 
  } 

  if(MaxEAX>=1) { 
    _asm { 
      MOV     EAX,                    1 
      CPUID 
      MOV     [REGEAX],               EAX 
      MOV     [REGEBX],               EBX 
      MOV     [REGECX],               ECX 
      MOV     [REGEDX],               EDX 
    } 
    dFamily=((REGEAX>>8)&0xF); 
    dModel=((REGEAX>>4)&0xF); 
    dStepping=(REGEAX&0xF); 

    dFamilyEx=((REGEAX>>20)&0xFF); 
    dModelEx=((REGEAX>>16)&0xF); 
    switch(((REGEAX>>12)&0x7)) { 
      case 0: 
        strcpy(dType, "Original"); 
        break; 
      case 1: 
        strcpy(dType, "OverDrive"); 
        break; 
      case 2: 
        strcpy(dType, "Dual"); 
        break; 
    } 

    for(C=1, Q=0;Q<32;C*=2, Q++) { 
      dComp1Supported[Q]=(REGEDX&C)!=0?1:0; 
    } 

    dBrand=REGEBX&0xFF; 
    dCacheLineSize=((strcmp(Comp1[19], "CLFSH")==0)&&(dComp1Supported[19]==1))?((REGEBX>>8)&0xFF)*8:-1; 
    dLogicalProcessorCount=((strcmp(Comp1[28], "HTT")==0)&&(dComp1Supported[28]==1))?((REGEBX>>16)&0xFF):-1; 
    dLocalAPICID=((REGEBX>>24)&0xFF); //This only works on P4 or later, must check for that in the future 

  } 

  printf("%s\n", dType); 
  printf("Family %i, Model %i, Stepping %i\n", dFamily, dModel, dStepping); 
  printf("Extended Family %i, Extended Model %i\n", dFamilyEx, dModelEx); 
  printf("Supported flags: "); 
  for(Q=0;Q<27;Q++) { 
    if(dComp1Supported[Q]) { 
      printf("%s ", Comp1[Q]); 
    } 
  } 
  printf("\n"); 
  printf("CacheLineSize: %i\n", dCacheLineSize); 
  printf("Logical processor count: %i\n", dLogicalProcessorCount); 
  printf("Local APIC ID: %i\n", dLocalAPICID); 
}